Gentoo
Ammasso 1100 iWarp Card
So, there are drivers for this card now in the 2.6.19 kernel, so I figured I would give this puppy a try...
lspci output:
01:0a.0 Co-processor: Ammasso AMSO 1100 iWARP/RDMA Gigabit Ethernet Coprocessor (rev 01)
dmesg output when trying to load the iw_c2 module:
c2: AMSO1100 Gigabit Ethernet driver v1.1 loaded PCI: Enabling device 0000:01:0a.0 (0114 -> 0116) ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 20 (level, low) -> IRQ 19 c2: Downlevel Firmware boot loader [1/7: got 0xff, exp 0x43]. Use the cc_flash utility to update your boot loader c2: Adapter not claimed c2: probe of 0000:01:0a.0 failed with error -5
At this time, I think there may be something wrong with the firmware on this card, so I will be looking around for any sort of firmware update software that I can find in order to try and fix it.
The problem turns out to be with the system board I have this plugged into. The system board does not actually support PCI-X, only PCI-64. As such, it doesn't have the speed necessary to deal with the Ammasso cards.